The DSMC2™ Base Expander is an ideal connector module for the general user’s Input/Output (I/O) needs. Manufactured from lightweight and durable magnesium, this low-profile module mounts directly to your DSMC2 BRAIN® and offers interface connections for power (DC IN), HDMI, 3G-SDI (HD-SDI), CTRL andSYNC ports (for Timecode and Genlock), as well as a 3.5mm microphone input and a 3.5mm line-level headphone out.
The DSMC2 Base Expander also offers rear-mounting support for the camera system-compatible battery and power modules, such as the DSMC2 REDVOLT XL Module. The low profile DSMC² Base Expander offers a variety of connectors and is ideal for run-and-gun and independent shooters.
NOTE:Â Only one (1) expander module can be used at a time.
| Dimensions | Height: 4.57 in. (116 mm) Width: 4.76 in. (121 mm) Depth: 1.50 in. (38 mm) |
| Weight | 0.45 lbs (203 g) |
| Material | Magnesium |
| BRAINÂ Mounting | 4x M4 captive mounting screws |
| BRAIN Connections | Power delivery via DSMC2 Rear pogo connector (13-Pin) Communication via DSMC2 Rear I/O connector (4×40 Pin) |
| Connectors | DC IN (6-Pin 1B LEMO socket) 3G-SDI output (75 Ω BNC), 60 Hz max frame rate HDMI 1.2 output (Type A socket), 60 Hz max frame rate SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket) CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00BLEMO socket) Stereo Analog Microphone input (3.5mm jack) Stereo Headphone output (3.5mm jack) |
| Battery Module Connections | Power delivery via DSMC2 Rear pogo connector (13-Pin) |
| Audio | 24-bit, 48 KHz, uncompressed, unbalanced mic level |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | –20°C to 50°C (–4°F to 122°F) |
| Operating Humidity | 0% to 85%, non-condensing |
| Storage Humidity | 0% to 85%, non-condensing |
| Firmware Requirement | Compatible with all DSMC2 firmware versions |
Reviews
There are no reviews yet.